Windsor CBE20 Instrucciones de operaciones descargar pdf (Pagina 14)

Operations

5. SPEED CONTROL SWITCH

Controls the maximum speed of the machine. There are two setting intended for scrubbing, speeds 1 and 2.

Speed 3 is recommended for transport only, not scrubbing.

To increase speed, press the top of the switch.

To decrease speed, press bottom of the switch. Speeds can be adjusted at any time, whether machine is

moving or not.

Basic: The position of the switch indicates speed setting.

Deluxe: The display indicates speed setting. When the key is turned on the controller will automatically adjust

the speed to setting 2.

6. DRIVE RESET SWITCH

This safety feature is designed to ensure safe engagement of propel drive. Each time the machine power is

turned on, and each time an operator steps on to the platform, the Drive Reset Switch must be pushed before

machine will propel.

7. HORN BUTTON

The horn is activated by pressing the horn button.

8. STEERING WHEEL

The steering wheel turns the front wheel causing the machine to change direction.

9. BATTERY CHARGE LEVEL INDICATOR-BASIC

Indicates the charge level of the batteries.

The meter display is divided into 10 vertical bars. Bars illuminated on the far right indicate full charge. Bars

flashing near the left side indicate the batteries should be recharged. Further operation of the machine could

damage the machine or the batteries.

If the batteries are not fully recharged, the meter will continue to flash on the left side.

10. HOUR METER-BASIC

Records the number of hours the machine has been in operation. This information is useful in determining

when to service the machine.

86345050 Chariot Burnisher

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 105 106

Sin comentarios

Windsor CBE20 Instrucciones de operaciones Pagina 14